Posts Tagged ‘Amp tech’

Backline Rental Companies Save Time & Money With TubeSync

Friday, October 8th, 2010

Backline rental companies don’t shell out on big, powerful expensive amps if they’re not going to be used on stage by pro musicians or semi-pro at the very least. That also means that the public shell out to go and see the artists play. Therefore, neither party will be particularly chuffed if an amp tube goes in the middle of a performance. Many travelling pro’s use the services of a backline rental company to take care of their equipment, however many tube guitar amps have problems which cannot be avoided by even the best tech.

iStock_000006400704XSmall

So yes, the pro musician or backliner probably carries a spare amp or three just in case, not to mention a box full of matched tubes!

Peace of Mind

TubeSync gives the backline tech and the musician peace of mind; simple. With TubeSync fitted in the amplifier, it’s a bit like having a dedicated amp tech working full time on that amp from the moment it’s turned on to the moment it’s turned off. Best not to fiddle around too much, then. Better still, let TubeSync do what fiddling there needs to be done. Tubesync sits within the circuitry and ensures that the pairs remain matched throughout, and micro-adjusting the biases when necessary. Four LEDs display the status of each tube, in a 100W head for example, if a failure occurs TubeSync will immediately switch out the affected pair; OK, the amp will be functioning at only half power, but at least it will be working. That’s peace of mind. Knowing that this technology is available but not using it would be a bit like driving really fast whilst wearing welding goggles. Don’t want to worry you or anything.

Crowd at the rock concertWhy Choose TubeSync

•    Performance peace of mind
•    Greater efficiency due to reduced maintenance back at the workshop
•    Can be configured to work with any fixed bias tube amp
•    Logs how the long the amp has been driven with audio
•    Records faults seen by the amp – Gives the tech full diagnostics
•    No need to purchase tubes in matched pairs anymore, TubeSync takes care of the biasing
•    Save money, better tube life / only need to change the defective tube
•    Reduces quiescent power consumption
•    Detects tube failure and prevents catastrophic damage to amp
•    Switches out faulty tubes and runs amps at half power until tube can be changed

and there’s much more….

Bias Runner Software

Improving amplifier biasing methods, servicing and fault diagnostics

Interfacing with Bias Engine hardware, the Bias Runner software has been designed to allow professional amp technicians to interrogate the status of an amplifier, alter bias settings, perform field diagnostics and configure the amp for best performance, further adding value to your services.

Bias Runner

Bias Runner is easy to install, offering full fault diagnostics, enabling tube biasing with and without audio present, either collectively or as individual tubes. It is the perfect tool for warranty provision and servicing, providing a database of hardware serial numbers and storing amplifier parameter settings for full traceability.

Please click here for your free information pack

TubeSync Service Points : Why Should You?

Friday, September 10th, 2010

TubeSync technology

TubeSync streamlines with the amp’s circuitry to constantly test and monitor the amp without altering the fundamental amplification process, tone or sound. It eliminates the need for bias current matching, increases tube life by micro-adjusting the bias on each tube, predicts tube failure and can, in the event of tube failure, even run the amp at half power, preventing catastrophic amp damage. ­­

The result is an amp unhampered by many of the problems associated with conventional tube amplification allowing musicians to enjoy classic tube sound quality without the frustrations.

These are just some of TubeSync’s unique features:

  • Eliminates the need for bias current matching of output tubes
  • Micro-adjusts the bias on each tube to ensure its full potential is realised
  • Assures reliability
  • Maintains optimum performance
  • Increases tube life
  • Reduces quiescent power consumption
  • Sets tubes at their optimum temperature as soon as you power up
  • Detects tube failure and prevents catastrophic damage to amp
  • Switches out faulty tubes and runs amps at half power until tube can be changed

A new industry standard

TubeSync technology has now been incorporated in new amp designs from some of the world’s most prominent amp manufacturers. Hiwatt, famed for their legendary reliability, was one of the first OEMs to recognise the potential of TubeSync for further enhancing the reliability and performance of their amps. KBO Dynamics continues to work with the industry’s biggest names to raise the bar in tube performance and reliability, creating a new industry standard in amp design and manufacture.

Introducing the Bias Engine

The Bias Engine is the hardware that encapsulates TubeSync’s unique technology. Fitting the Bias Engine is a straightforward procedure, with all necessary components supplied within the retrofit kit. It is stipulated that the Bias Engine is fitted by an accredited technician.

Bias engine retailThe Bias Engine is sold as a part of the TubeSync Professional Amp Upgrade Kit containing:

TubeSync Bias Engine Hardware

TubeSync hardware is wired straight into the amp’s circuitry. The Bias Engine is a very compact component that can be incorporated in both point-to-point and PCB wired amps.

Tube fault LED indicator harness and amp chassis LED plate

The Bias Engine is wired to 4 LED indicators that permanently illuminate when the tube is faulty and ‘flash’ when the tube needs to be replaced. The LEDs sit on the amp chassis, surrounded by the LED plate.

Wiring harness and mechanical fixings

The wiring harness, bundling all necessary wires and connectors, completes the kit along with a full set of mechanical fixings for securing the Bias Engine.

TubeSync Bias Runner software

Improving amplifier biasing methods, servicing and fault diagnostics

Interfacing with Bias Engine hardware, our Bias Runner software has been designed to allow OEMs and professional amp technicians to interrogate the status of an amplifier, alter bias settings, perform field diagnostics and configure the amp for best performance, further adding value to your services.Bias Runner_02

Bias Runner is easy to install, offering full fault diagnostics, enabling tube biasing with and without audio present, either collectively or as individual tubes. It is the perfect tool for warranty provision and servicing, providing a database of hardware serial numbers and storing amplifier parameter settings for full traceability.

Total service hours

Reads and displays the total number of hours the amplifier has been powered up. Optional reset facility available if required.

Total duration with audio

Reads and displays the total number of hours the amplifier has been driven with audio. Optional reset facility available if required.

Total hours idle

Reads and displays the total number of hours the amplifier has remained idle i.e. has not been driven with audio. Optional reset facility available if required.

Faulty tube log

Reads and displays the number of times a tube has been switched off due to a fault during the lifetime of the amplifier. A reset function is available for each individual tube.

Bias current (Audio present)

Enables the user to adjust tube current bias settings collectively or individually

Bias Current Idle (No Audio Present)

Enables the user to adjust tube current bias settings collectively or individually

Hardware and version status

Displays the serial number of the TubeSync module and the hardware version number

Serial number and settings database

Stores all serial numbers together with amplifier parameter settings in a   database for full traceability

Our commitment to you

We work closely with all of our partners to promote high standards and to support you in realising the full benefits of our truly innovative and impactful core technology and associated products.

As a TubeSync retailer or accredited technician you will receive:

Guaranteed product quality

All of our products are manufactured to the highest quality standards using state of the art assembly equipment. All components are ROSH compliant and uniquely identified for full batch traceability

A comprehensive solution

A complete package of hardware and software supports ease of use and easy configuration

Technical support

Our approach is founded on product and service quality. We offer our retail partners generous technical support to ensure that you are fully equipped for promoting TubeSync technology and advising your customers appropriately.

As an authorised retailer you will appoint a technician(s) who will receive training from our own technical team and who will be required to become certified as an accredited TubeSync technician before performing installations.

Warranty

All components come with a 12 month warranty which commences from the date of installation. Full warranty terms are available on request.

Guitar Amp Users – Get TubeSync Fitted!

Wednesday, September 8th, 2010

With TubeSync fitted in your amp there is no need to match output tubes. Drop in any combination of makes OR EVEN TYPES!!! (EL34, KT77, KT88, 6L6 etc) and TubeSync will automatically sense and adjust the output bias of each tube independently to balance the amp. Imagine what new tones you can create from those limitless output tube combinations! You can even run a 2 X EL34s and 2 X 6L6s in your 100W head simultaneously, alternately you can use the half power mode and switch between  6L6s or EL34s at 50W output power, now that’s cool!Rock Star

Read on to find out how you can get TubeSync fitted into your amp

TubeSync can only be installed by accredited engineers via ‘TubeSync Service Points’. To find the nearest TubeSync Service Point near you, please click on the image blow

TubeSync Service Point

Dennis Marshall’s Amp Repair Shop Scotland Becomes An Approved TubeSync Service Point

Thursday, September 2nd, 2010

Over the last 40 years Dennis Marshall has worked with many people in the music business. Some famous, some to become famous, but mostly just plain ordinary musicians. Dennis has gained a reputation throughout the UK for his work and contribution to the music business and the latest news is……is that Dennis has recently signed up as the exclusive Scottish installer of TubesSync.

‘’TubeSync is a new product and is the new ‘wheel’ for guitar tube amps’’ states Dennis, ‘’ No need to match output valves in your amp. Drop in any combination of makes OR EVEN TYPES!!! (EL34, KT77, KT88, 6L6 etc).’’

‘’ TubeSync will automatically sense and adjust the output bias of each tube independently to balance the amp. Imagine what new tones you can create from those limitless output tube combinations!’’

Dennis has an amp in his workshop with Tubesync installed – so anybody is welcome to come in and try it out!!

You can reach Dennis directly on…………..

Telephone 01383 881761

Email tech@dennismarshall.co.uk

Or Mail or in person at

6 Main Street, Newmills

Dunfermline, Fife, KY12 8SR

Bias_Engine

Every person who goes into Dennis’s workshop is equally important and will always get the same high standard of service. Dennis is an approved Mesa Boogie engineer and has worked with a number of high profile bands including:

Deacon Blue, The Proclaimers, Roger Nichols, Texas, George Michael band, Nine Inch Nails, Wasp, Uriah Heep, The Hazey Janes, Pete Caban, Glasvegas, Katie Melua, Dave Valentine, Ona, Mark DeNeys, Fiesty Piranhas, Ally McErlaine, Bobby Bandiera, Stapleton, Southside Johnny and the Asbury Jukes, Dougie MacLean, The Eels, Joe Gore, Joe Gormal, The Searchers, Jon Solish, Ray Wilson, Idlewild, Lionel Richie, Paul Buchanan, Stuart McCredie, The Eagles, Ron Sexsmith, Tam White, Lauri Anderson, Willie Logan, Bobbie Heatley, Steve Adey, Robbie Gladwell, Frank Macbeth, Sons and Daughters, Hamish McGregor, Miguel Orgel, Pilot, John Goldie , Marcus Ford, Echo and the Bunnymen, Athol Fraser, Mats Nermark, Bobby Carlos, Craig Oxley, Steuart Smith, The Jam, Healthy Minds Collapse, Avast, Adrian Clark, Nick Guppy, Sergeant, Tango in the Attic, Mike Walker, NYJOS, One Night of Queen, Davie Brockett, Runrig, Glasshouse Project, Kevin Brown, Ocean Colour Scene, Tony ‘Doggen’ Foster, Midas Fall, Mayhew….

TubeSync UK Service Points Being Appointed

Friday, August 13th, 2010

We are offering select retailers and amp technicians the opportunity to become authorised suppliers of TubeSync technology and to take advantage of our new innovative amplifier technology.

  • Become a supplier of KBO Dynamics’ TubeSync Bias Engine
  • Generate revenue from hardware sales and fitting
  • Benefit from accreditation as a TubeSync technician
  • Add value to your offering with improved amplifier biasing methods, servicing and fault diagnostics, using TubeSync Bias Runner software
  • Get involved as TubeSync emerges in new amp designs from major amp manufacturers.

If you would like to be considered as TubeSync ‘Service Point’ then please email : info@tubesync.co.uk or telephone +44 (0) 1207 585846.

TubeSync_Service_Point