Posts Tagged ‘Hiwatt custom amp’

Orange Amplification Announces DIVO VT1000 Valve Tester

Thursday, January 31st, 2013

Orange Amplification has released the DIVO  VT1000 Valve Tester, an automatic valve tester that performs a host of diagnostics on both preamp and power amp tubes. The unit has one octal and two nine pin valve sockets to fit pe-amp and EL34 valves. Once inserted, the user presses the start button and the tests are run.

Vt1000 valve tester

VT1000 Details:

Tests run:

  • Heater filament test: Short circuit
  • Heater filament test: Open circuit
  • Heater filament test: Tolerance check
  • Heater cathode insulation: Leakage
  • Heater cathode insulation: Short Circuit
  • Tests for heater current abnormalities
  • Amplification factor
  • Voltage gain
  • Power gain
  • Screen grid test
  • Mutual conductance test
  • Dual test for double triodes
  • Emission
  • Inter electrode leakage
  • Inter electrode short circuit
  • Flash-over (arc detection, high voltage breakdown)
  • Gas ionisation test

Compatible Valves:

  • EL34/6CA7
  • EL34L
  • 6L6
  • 6V6/6v6GTA
  • KT66
  • KT77
  • KT88
  • 6550
  • 5881
  • EL84/6BQ5
  • ECC81/12AT7
  • ECC82/12AU7
  • ECC83/12AX7
  • ECC99
  • 12BH7

TubeSync Fitted To A Mesa Boogie F-50

Thursday, June 9th, 2011

Sensational blues guitarist Mitch Laddie has been out touring with the product fitted to his Mesa/Boogie F-50, which he said sounds “incredible”. “I had totally fallen out of love with this particular amp before Tubesync was fitted but the difference in sound is more than substantial.The response and tone have been improved ten-fold. Very tight, very fat and all round punchier, especially in the low to mid frequencies.”

Mitch & His Mesa F50“I believe the product is very interesting and definitely nothing like anything I’ve seen or used before. The main advantages of the product are that not only does it give you a valve maintenance feature by displaying a light if a fault is found within a valve, but it manages your valves to run at an equal number of milliamps. This means that each valve is working at an equal rate which in theory gives you optimum amp performance.

F50

Above : TubeSync fitted to a Mesa Boogie F-50

Tube Amp Testing For Professional Stage Performers – Engineering Tube Talk

Tuesday, February 22nd, 2011

A common requirement for tube amplifiers used for professional and stage purposes is that there should be a high percentage of confidence that one or more tubes will not fail during the performance. Tubes are often thought of in the same manner as light bulbs, in that they are most likely to fail catastrophically at switch on. This means that the moments just after the switch on point constitute the most stressful and potentially damaging periods in the life of the equipment.

In an attempt to guard against this possibility, it is common practice to do one of two things on a regular basis.

1/ regularly remove the tubes and have them commercially tested;

2/ replace the tubes with new stock on a regular basis.

These two methods may give the operator a degree of confidence but in fact, it can be shown that the faith placed in both methods is misplaced.

It is a known fact that removal of a tube from its socket results in a number of potentially damaging mechanical stresses on the metal to glass seals around the pins. Each insertion of an all glass tube will cause micro-cracking of the glass around the pin. This will invariably cause a small leakage of air into the valve, causing ‘gassing’ and eventually leading to its demise.

Removal for testing will also break the intimate contact between the holder and the tube contact pin, resulting in a poorer contact on re-insertion.

Many tube testers apply unreasonable electrical stresses to the tube internal electrodes and it is not uncommon for a known good valve to be damaged during the test. Tube testers can also give erroneous results depending on the way they perform the tests, possibly allowing faulty tubes to show ‘good’ and the good valves to be rejected as ‘bad’.

The second method of ‘blanket replacement’ with new stock on a regular basis can also lead to problems because if the failure distribution curve for tubes is analysed, it can be seen to follow the classic ‘bathtub’ failure curve. This inevitably means that an amplifier which is regularly ‘re-tubes’ will inevitably be considerably more likely to fail during the first hundred hours service than one which has been left untouched.

TubeSync overcomes these problems by performing an ‘in circuit’ test on the tubes every time the amplifier is powered up. The mutual conductance (gm) of the tube is measured by monitoring the cathode current of each valve whilst adjusting the grid bias in fixed steps. The results are tabulated and the new value is compared with previously stored values. A decision is then made on how far the tube has decayed in emission since the last test. Outputs from the device inform the user of the predicted remaining life of the tube.

TubeSync_350

TubeSync Facebook Friends Are Now 2,000+

Wednesday, February 16th, 2011

Due to the growing demand TubeSync has now over 2,000 friends on Facebook!

facebook-logo

Click on the link above if you would like to join the TubeSync Revolution

Aston Electronics Becomes A TubeSync Service Point. Guitar Amplifier Repair and Mods and Custom Amplification Services

Thursday, December 2nd, 2010

Volt Amps

For over 30 years, Geoff Pugh has been providing the musicians’ community with vital repair services. We repair, modify and produce high quality valve amplifiers. Our services extend beyond that of just valve amplifiers and therefore we are highly skilled in repairing and modifying other products such as effects pedals, solid state amplifiers, hi-fi amplifiers, etc.

Aston Electronics is the home of Volt Amplifiers. Volt Amplifiers are a range of high quality hand made amps built on demand. Specific features and requirements can be provide you with the ultimate amp of your choice.

Aston Electronics is also the home of the Darktone pedal series. These high quality hand made pedals provide you with a huge range in tone and depth which can be vital to a players live setup.

We are proud to annouce that Aston Electronis is now an approved installer of TubeSync.

To find out more visit : http://www.voltamps.co.uk

What People Say About TubeSync

Friday, October 15th, 2010

Guitarist Mitch Laddie has been out touring with the product fitted to his Mesa/Boogie F-50, which he said sounds “incredible”. “I had totally fallen out of love with this particular amp before Tubesync was fitted but the difference in sound is more than substantial. The response and tone have been improved ten-fold. Very tight, very fat and all round punchier, especially in the low to mid frequencies.”

Mich_Laddie

“I believe the product is very interesting and definitely nothing like anything I’ve seen or used before. The main advantages of the product are that not only does it give you a valve maintenance feature by displaying a light if a fault is found within a valve, but it manages your valves to run at an equal number of milliamps. This means that each valve is working at an equal rate which in theory gives you optimum amp performance.

“You can also connect the product to a computer and by using the TubeSync software you can dial in the parameters for each valve to your liking. This makes room for a lot of exciting experimentation,” he said.

“You can fit whichever valves you like, no matter which amp you are using with the product fitted and not only can you fit whatever valves you chose but you can mix valves and it will automatically bias them with no issues at all. This also gives room for a lot of exciting experimentation which we are going to get under way when I return from the current tour.”

Orange
Technical director for Orange Amps, Adrian Emsley, plans to launch a new 100W model involving TubeSync at the upcoming Winter NAMM show next year, but didn’t disclose any further details. He did say that he thought the product was “extremely groundbreaking” with regards how it can be incorporated into high end tube guitar, bass and hi-fi amplifiers. “It can keep an amplifier perfectly set up and keep it always sounding great on the road!” he said.

Audio Kitchen Amps, an Acton-based guitar amp manufacturer, has incorporated TubeSync into its bass amps, one of which is currently being used by Kings of Leon. Audio Kitchen’s Steve Crow commented: “It’s pretty cool, that’s for sure. For me the most revolutionary aspect is the show-must-go-on factor; normally if an output valve goes bandy during a gig it’ll take out a fuse on the amp and the player is left playing air-guitar, but TubeSync will shut down the offending valve pairs and the show goes on. Genius.”?Tired Pony, the supergroup featuring Snow Patrol frontman Gary Lightbody and REM’s Peter Buck, have already played their first live gig with the help of an Audio Kitchen Base Chopper amp fitted with TubeSync, at London’s Forum venue in Kentish Town on July 14. According to Crow the band have been “loving it” so far and there are other bands lined up to try it out.

Audio Kitchen
Crow added: “People are scared of the word ‘Bias’, but TubeSync does lots of the thinking for you so it’s possibly a less daunting proposition for the average musician or tech. Also because the valves are individually biased, you don’t necessarily need matched pairs of output valves anymore.”

Hiwatt UK amplifiers, as used by the likes of Arctic Monkeys, Coldplay, Killers and The Enemy, is another adopter of the TubeSync. The company plans to install the product on its pro series of guitar amplifiers as standard. Hiwatt’s Mark Lodge said: “Pretty much all of the bands that we deal with will start to add TubeSync to their amplifiers over the next year. We are just actually putting together the wiring practices etc, for our builders to be able to incorporate TubeSync into our UK pro series custom shop amplifiers.” Lodge said the reason they have got behind the product from the start was because it is a “fantastic” piece of kit that solves many problems associated with valve amplifiers.

Hiwatt UK
He added: “We all know that valve amplifiers sound by FAR the best, the only issue is that 99.9% of the time, the valves let the amplifier down. The deteriation can be traced back to when the military ceased to use valves; since then, the quality has gone down and down. TubeSync negates this and actually once more gives builders and performers hope and peace of mind. I think it is a huge step forward for the valve amplifier.”

Wienbrock Amplifiers
Wienbrock Amplifiers owns two 45W production amps that currently use TubeSync, one with overdrive, one without. Rob Wienbrock said: “The TubeSync takes a completely new approach that has many hidden benefits. Its main advantages are significant reduction in power consumed, huge reduction in heat emissions, greatly extended valve and component life and great reduction in maintenance costs.
BREAKING THE BACKLINE MARKET

John Henry’s will be the first backline rental company to test out the TubeSync management system. Said Fallon: “We see the backline rental market as a market for us because they do have problems with amplifiers and they have to maintain the ones they’ve got when they rent them out.
“John Henry took us round his facilities and he has hundreds of amplifiers, one shelf had about 50 marshall amps on, so we realised we needed to give him something quick to install.”
John Henry commneted: “I haven’t managed to see one in action yet but from the brief overview it was a very interesting product, there’s nothing else like it, and if it works we would certainly be interested in having a look and trying it out. Anything that can tell you when a valve is about to pop is a good thing.
“I was a little bit concerned about how you actually fit it without drilling holes and damaging the authenticity of a vintage piece of kit because as it stands it’s based at the valve market. I think they need to make one which is an external fit. So it’s in the early stages and I’d need to get my engineers to test it out, but in theory it looks good.”

John Henrys
KBO Dynamics has been working on an external fit model specifically for the backline rental market. Said Fallon: “At the moment TubeSync is a circuit card that goes in the amp, but we’ve put it into a large circuit board self contained unit. It de-skills the fitting process so the user can easily retro-fit it into an existing guitar amp in around 5-10 minutes. John Henry will be the first one to test this out.”
Added Henry: “We go through thousands of valves a year so for us it would be a great asset as we might not need to replace a set of valves but maybe just one. It has a lot of potential.”

Backline Rental Companies Save Time & Money With TubeSync

Friday, October 8th, 2010

Backline rental companies don’t shell out on big, powerful expensive amps if they’re not going to be used on stage by pro musicians or semi-pro at the very least. That also means that the public shell out to go and see the artists play. Therefore, neither party will be particularly chuffed if an amp tube goes in the middle of a performance. Many travelling pro’s use the services of a backline rental company to take care of their equipment, however many tube guitar amps have problems which cannot be avoided by even the best tech.

iStock_000006400704XSmall

So yes, the pro musician or backliner probably carries a spare amp or three just in case, not to mention a box full of matched tubes!

Peace of Mind

TubeSync gives the backline tech and the musician peace of mind; simple. With TubeSync fitted in the amplifier, it’s a bit like having a dedicated amp tech working full time on that amp from the moment it’s turned on to the moment it’s turned off. Best not to fiddle around too much, then. Better still, let TubeSync do what fiddling there needs to be done. Tubesync sits within the circuitry and ensures that the pairs remain matched throughout, and micro-adjusting the biases when necessary. Four LEDs display the status of each tube, in a 100W head for example, if a failure occurs TubeSync will immediately switch out the affected pair; OK, the amp will be functioning at only half power, but at least it will be working. That’s peace of mind. Knowing that this technology is available but not using it would be a bit like driving really fast whilst wearing welding goggles. Don’t want to worry you or anything.

Crowd at the rock concertWhy Choose TubeSync

•    Performance peace of mind
•    Greater efficiency due to reduced maintenance back at the workshop
•    Can be configured to work with any fixed bias tube amp
•    Logs how the long the amp has been driven with audio
•    Records faults seen by the amp – Gives the tech full diagnostics
•    No need to purchase tubes in matched pairs anymore, TubeSync takes care of the biasing
•    Save money, better tube life / only need to change the defective tube
•    Reduces quiescent power consumption
•    Detects tube failure and prevents catastrophic damage to amp
•    Switches out faulty tubes and runs amps at half power until tube can be changed

and there’s much more….

Bias Runner Software

Improving amplifier biasing methods, servicing and fault diagnostics

Interfacing with Bias Engine hardware, the Bias Runner software has been designed to allow professional amp technicians to interrogate the status of an amplifier, alter bias settings, perform field diagnostics and configure the amp for best performance, further adding value to your services.

Bias Runner

Bias Runner is easy to install, offering full fault diagnostics, enabling tube biasing with and without audio present, either collectively or as individual tubes. It is the perfect tool for warranty provision and servicing, providing a database of hardware serial numbers and storing amplifier parameter settings for full traceability.

Please click here for your free information pack

TubeSync Service Points : Why Should You?

Friday, September 10th, 2010

TubeSync technology

TubeSync streamlines with the amp’s circuitry to constantly test and monitor the amp without altering the fundamental amplification process, tone or sound. It eliminates the need for bias current matching, increases tube life by micro-adjusting the bias on each tube, predicts tube failure and can, in the event of tube failure, even run the amp at half power, preventing catastrophic amp damage. ­­

The result is an amp unhampered by many of the problems associated with conventional tube amplification allowing musicians to enjoy classic tube sound quality without the frustrations.

These are just some of TubeSync’s unique features:

  • Eliminates the need for bias current matching of output tubes
  • Micro-adjusts the bias on each tube to ensure its full potential is realised
  • Assures reliability
  • Maintains optimum performance
  • Increases tube life
  • Reduces quiescent power consumption
  • Sets tubes at their optimum temperature as soon as you power up
  • Detects tube failure and prevents catastrophic damage to amp
  • Switches out faulty tubes and runs amps at half power until tube can be changed

A new industry standard

TubeSync technology has now been incorporated in new amp designs from some of the world’s most prominent amp manufacturers. Hiwatt, famed for their legendary reliability, was one of the first OEMs to recognise the potential of TubeSync for further enhancing the reliability and performance of their amps. KBO Dynamics continues to work with the industry’s biggest names to raise the bar in tube performance and reliability, creating a new industry standard in amp design and manufacture.

Introducing the Bias Engine

The Bias Engine is the hardware that encapsulates TubeSync’s unique technology. Fitting the Bias Engine is a straightforward procedure, with all necessary components supplied within the retrofit kit. It is stipulated that the Bias Engine is fitted by an accredited technician.

Bias engine retailThe Bias Engine is sold as a part of the TubeSync Professional Amp Upgrade Kit containing:

TubeSync Bias Engine Hardware

TubeSync hardware is wired straight into the amp’s circuitry. The Bias Engine is a very compact component that can be incorporated in both point-to-point and PCB wired amps.

Tube fault LED indicator harness and amp chassis LED plate

The Bias Engine is wired to 4 LED indicators that permanently illuminate when the tube is faulty and ‘flash’ when the tube needs to be replaced. The LEDs sit on the amp chassis, surrounded by the LED plate.

Wiring harness and mechanical fixings

The wiring harness, bundling all necessary wires and connectors, completes the kit along with a full set of mechanical fixings for securing the Bias Engine.

TubeSync Bias Runner software

Improving amplifier biasing methods, servicing and fault diagnostics

Interfacing with Bias Engine hardware, our Bias Runner software has been designed to allow OEMs and professional amp technicians to interrogate the status of an amplifier, alter bias settings, perform field diagnostics and configure the amp for best performance, further adding value to your services.Bias Runner_02

Bias Runner is easy to install, offering full fault diagnostics, enabling tube biasing with and without audio present, either collectively or as individual tubes. It is the perfect tool for warranty provision and servicing, providing a database of hardware serial numbers and storing amplifier parameter settings for full traceability.

Total service hours

Reads and displays the total number of hours the amplifier has been powered up. Optional reset facility available if required.

Total duration with audio

Reads and displays the total number of hours the amplifier has been driven with audio. Optional reset facility available if required.

Total hours idle

Reads and displays the total number of hours the amplifier has remained idle i.e. has not been driven with audio. Optional reset facility available if required.

Faulty tube log

Reads and displays the number of times a tube has been switched off due to a fault during the lifetime of the amplifier. A reset function is available for each individual tube.

Bias current (Audio present)

Enables the user to adjust tube current bias settings collectively or individually

Bias Current Idle (No Audio Present)

Enables the user to adjust tube current bias settings collectively or individually

Hardware and version status

Displays the serial number of the TubeSync module and the hardware version number

Serial number and settings database

Stores all serial numbers together with amplifier parameter settings in a   database for full traceability

Our commitment to you

We work closely with all of our partners to promote high standards and to support you in realising the full benefits of our truly innovative and impactful core technology and associated products.

As a TubeSync retailer or accredited technician you will receive:

Guaranteed product quality

All of our products are manufactured to the highest quality standards using state of the art assembly equipment. All components are ROSH compliant and uniquely identified for full batch traceability

A comprehensive solution

A complete package of hardware and software supports ease of use and easy configuration

Technical support

Our approach is founded on product and service quality. We offer our retail partners generous technical support to ensure that you are fully equipped for promoting TubeSync technology and advising your customers appropriately.

As an authorised retailer you will appoint a technician(s) who will receive training from our own technical team and who will be required to become certified as an accredited TubeSync technician before performing installations.

Warranty

All components come with a 12 month warranty which commences from the date of installation. Full warranty terms are available on request.

Guitar Amp Users – Get TubeSync Fitted!

Wednesday, September 8th, 2010

With TubeSync fitted in your amp there is no need to match output tubes. Drop in any combination of makes OR EVEN TYPES!!! (EL34, KT77, KT88, 6L6 etc) and TubeSync will automatically sense and adjust the output bias of each tube independently to balance the amp. Imagine what new tones you can create from those limitless output tube combinations! You can even run a 2 X EL34s and 2 X 6L6s in your 100W head simultaneously, alternately you can use the half power mode and switch between  6L6s or EL34s at 50W output power, now that’s cool!Rock Star

Read on to find out how you can get TubeSync fitted into your amp

TubeSync can only be installed by accredited engineers via ‘TubeSync Service Points’. To find the nearest TubeSync Service Point near you, please click on the image blow

TubeSync Service Point

TubeSync UK Service Points Being Appointed

Friday, August 13th, 2010

We are offering select retailers and amp technicians the opportunity to become authorised suppliers of TubeSync technology and to take advantage of our new innovative amplifier technology.

  • Become a supplier of KBO Dynamics’ TubeSync Bias Engine
  • Generate revenue from hardware sales and fitting
  • Benefit from accreditation as a TubeSync technician
  • Add value to your offering with improved amplifier biasing methods, servicing and fault diagnostics, using TubeSync Bias Runner software
  • Get involved as TubeSync emerges in new amp designs from major amp manufacturers.

If you would like to be considered as TubeSync ‘Service Point’ then please email : info@tubesync.co.uk or telephone +44 (0) 1207 585846.

TubeSync_Service_Point