Posts Tagged ‘KBO Dynamics’


Hiwatt Amplify Their Success With TubeSync

Thursday, April 1st, 2010

IT TAKES more than sex, drugs and rock ‘n’ roll to make a guitarist sound great. John Hill meets North East amplifier makers at the cutting edge of technology.


Hiwatt & TubeSync

ANDY Fallon and Colin Arrowsmith are not guit- arists. Their affair with the valve amplifier isn’t born of a youth spent practising solos or arguing over kit specifications next to the counter of their local guitar store.

In fact, Andy’s experience lies in automotive and military engineering, while Colin is an expert in microelectronics.

However, their contribution to a piece of kit beloved of the White Stripes, The Who and Black Sabbath has attracted the attention of major international amp-makers.

Andy and Colin are co-founders of KBO Dynamics, a Consett company created to market technology designed to improve audio and guitar amplification.

They are the men behind TubeSync, a “tube management system” which monitors the performance of valve amplifiers to avoid meltdowns while maintaining sound.

The product won the innovation award in the Durham and Wearside heat of the nebusinessawards 2009, run by The Journal and Evening Gazette.

KBO co-founder Andy said: “We were looking for a niche market. Neither of us plays the guitar, but we did a lot of brainstorming.

“Colin worked with microelectronics, but he’s also an expert with valve technology. We realised very quickly that the biggest application for valves was inside guitar amps.”

The valve amp isn’t exactly a rapidly advancing technological product. The technology was developed between the world wars and uses a series of vacuum tubes to regulate a signal. It was present in items from TVs to radios, but fell out of favour in the 70s.

The resurgence of such equipment has been prompted by high-end users in the audio and guitar amp market, who praise its natural sound.

Andy said: “There’s a warmer, more rounded tone to it. Anyone who’s serious about playing a guitar would only use a valve amp.”

When they developed TubeSync, the pair didn’t set out to change the sound. Instead, they set their sights on the downside, the problems that plague valve amp users looking for that special sound.

He said: “The closest you can compare it to is an engine management system on a car. It’s like having a maintenance technician looking after your amp 24/7 without you noticing it. It’s continuously monitoring the circuit, looking for faults.

“We got a market research report from Think M in Newcastle. It conducted a series of live interviews with OEM companies and guitarists.

“We looked at the problems people were talking about, but we didn’t change the sound.

“It can detect faults. It can disconnect a pair of valves if it finds one is faulty. You normally have to buy valves in matched pairs and you need to take the amp to a technician to tweak it, but with TubeSync you only need to buy one valve if one fails and it can tweak the system for you.

“One faulty valve can blow up the output transformer. TubeSync can detect this and prevent catastrophic damage.”

KBO had support from a number of North East backers. It won £90,000 from NorthStar Equity Investors’ Proof of Concept fund, developed its prototype with help from Business Link and got £20,000 from the North East England Investment Centre. The process was then advanced by a grant of £20,000 from One North East.

In all, Andy estimates the product has taken 18 months and around £200,000 to develop.

He said: “We built and developed it from the bottom up. We tried to use components that were available in the marketplace and we created our own unique algorithm.

“We don’t think there’s a similar product to this on the market and we’re hoping to receive a patent in the next couple of months.”

Right now, KBO is on the hunt for buyers. The team has just returned from the international Musikmesse instrument trade show in Frankfurt, where they saw a live band perform using TubeSync technology for the first time.

He said: “It was being used by a band playing Pinball Wizard by The Who. We’re expecting to see the technology on stage properly some time this year.

“The lead time on the product is about eight weeks so it could well be appearing in the summer.”

British amp manufacturer Hiwatt, whose users include Arctic Monkeys, The Killers and The Kooks, has incorporated TubeSync into its amps and Andy says that others, such as fellow Brits Orange, are keen.

The company is talking to manufacturers about fitting it in amps this year and down the line it may create variants of the product that could be fitted by amp technicians or even end users.

TubeSync_225


TubeSync For Valve / Tube Amps What am I ?

Friday, March 19th, 2010

About me:

I am a revolutionary new amp component, enhancing amp performance resulting in pure valve magic. My superior amp technology overcomes many of the problems associated with conventional tube amplification. With a little help from me there is no need for bias current matching, I can increase tube life and take your valves to their optimum temperature as soon as you power up. I can be easily integrated into any guitar valve amplifier. I take care of the detail, so you can concentrate on becoming a master of the strings . . . You can find a lot more about me on my main website www.tubesync.co.uk

The TubeSync Bias Engine

The TubeSync Bias Engine

Eliminates the need for bias current matching of output tubes

Increases manufacturing efficiencies

Micro-adjusts the bias on each tube to ensure its full potential is realised

Maintains optimum performance

Increases tube life

Assures reliability

Reduces quiescent power consumption

TubeSync

TubeSync


Never Hang Your Guitar Tubes / Valves Upside Down

Thursday, March 18th, 2010

Never hang your guitar tubes upside down as many horrible things may happen!!!

The heat from the electrodes will go directly to the base pins and cause problems with oxidization. The heat will also cause micro-cracks on the pins of the tube / valve, which could result in failures.

Don't_ hang_ your_tubesSo don’t do it !!…….


Guitar Amp Tubes / Valves The History Of .. EL34 s etc

Thursday, March 18th, 2010

Until the introduction of the germanium transistor in the late 1950’s, there was no alternative form of high quality audio amplification to the thermionic valve (American terminology was always ‘Tube’). The 1960’s, 70’s and 80’s saw a steep decline in the usage of valves for all purposes except audio amplifiers, to the point that, with a few exceptions, they were almost entirely replaced by transistors and integrated circuits. However, since the late 1980’s, valve amplifiers have experienced a renaissance which has, in the last decade grown rapidly year on year.

The unique character of the ‘Tube Sound’ has once again attracted both amateur and professional interest in the areas of High Fidelity (HiFi) amplification, Musical Instrument (MI) amplification (notably the electric guitar) and Audio amplification. The dominance of digital technology now, means that the valve amplifier is seen as new to younger people and as nostalgic to the older generation. Please note it is estimated, that the electric guitar amplification market consume as many as three out of four of the world’s production of audio tubes.

EL34 Valve

EL34 Valve

Many arguments have been put forward as to why tube amplification ‘sounds’ better than digital. Some differences can be proved using measuring instruments, whilst others are down to the nuances of the human ear. Whatever the reason, evidence shows more and more listeners appear to prefer the sound of a tube amplifier.

The demand for tube amplifiers is rapidly growing, with products ranging from a few hundred pounds to several thousand pounds, depending on quality and output power, with tube sales worldwide currently standing at over $100,000,000. Today vacuum-thermionic devices hold sway over the US $100 million worldwide guitar amp business. One rough estimate shows a 10-percent-per-year growth in demand for tubes used in MI instrument amplifiers and high-end audio since the late 1980s, with no apparent slackening.

However, the problems with existing tube amplifier technology is that the circuits used are based on ‘classic’ designs developed in the 1940’s and 50’s and, although more modern technology has occasionally been applied, this is usually confined to regulating the power supplies. One of the principle disadvantages of existing tube amplifiers is that they are very inefficient in converting electrical power into audio power. This is largely due to the ‘classic’ methods of controlling them. All analogue high power amplifiers require a system known as ‘Biasing’ to be applied to them. This controls the output devices and prevents them from ‘Thermal’ overload and eventual destruction. It does, however, incur a heavy cost in loss of output power and increased heat dissipation. In addition valves also need to be used in ‘Matched’ pairs, in order to control distortion of the output signal. This process is time consuming and expensive when carried out on a commercial basis.

THE SOLUTION IS ……..

EL34

EL34


Innovation Winners Attracts Famous UK Guitar Amp OEMs

Wednesday, March 17th, 2010

KBO Dynamics are making their mark in the international music industry. They will be showcasing their technology with a number of major customers at the high profile international music fair, Musikmesse in Frankfurt this March. Hiwatt is just one of the world’s most prominent guitar amp manufacturers and KBO Dynamics are delighted to have TubeSync technology incorporated in their latest amp designs.

KBO Dynamics Win Innovation Award 2009

KBO Dynamics Win Innovation Award 2009

KBO Dynamics, winners of the Durham and Wearside Innovation Business Awards 2009, stated : TubeSync technology achieves unique benefits including vastly improved reliability and performance in tube amps.  Securing orders from Hiwatt and others is a significant achievement.

KBO Dynamics Power and Control Devices

KBO Dynamics Power and Control Devices

‘The scale of the companies that KBO Dynamics are working with is impressive. They have ambitious plans for growth and have been performing very well since receiving investment from us. KBO Dynamics is an excellent example of successful innovation coming out of the North East and is testimony to the region’s strong knowledge base,’ Dr Richard Exley, North Star Equity Investors.

­The company has also been supported with market research, manufacturer introductions and early product launch activity by think M., a leading strategic marketing and research agency specialising in technology and innovation.

Andy Fallon, KBO Dynamics, ‘think M.’s channel research played an important part in helping us to secure investment by providing the market evidence required to prove TubeSync’s growth potential. It helped us to refine our offering to amp manufacturers and was instrumental in getting us through the door at some really high profile organisations.’

TubeSync

TubeSync

As KBO look forward to Frankfurt they already have further collaborations underway and anticipate generating more interest from manufacturers, amp technicians and musicians alike. If you would like any more information on TubeSync technology, please visit www.kbodynamics.com.