Posts Tagged ‘Output transformer’
Thursday, July 1st, 2010
An interesting phenomenon that some ‘leaky’ tubes, removed from conventionally biased amps, appear to improve when run with TubeSync. The reason may be that when the tube gets hot, g1/cathode leak causes a current increase, but it is automatically biased ‘back’ to compensate, which allows the tube to cool down again and thus reduce leakage et al. After a while the leak sometimes reduces or disappears completely – we surmise that the getter gets a chance to mop up stray gas molecules or the metallic deposit gets ‘boiled off’ the mica supports. This type of fault in a conventional amp would normally blow the HT fuse, however TubeSync can avoid is and rectify the problem! Cool eh?
Tags: 100W, 50W, AD 200, amp, Base Head, bias, bias problems, current, Custom, DR103, EL34, fuse, gain, hi, Higain, hiwatt, Hiwatt at Musikmesse, HT, Huiwa, JC900, JCM800, JCM900, KT88, Laney, Marshall, orange, Output transformer, Pacemaker 100, Problem, PV5150, Rockerverb 50 Combo, Thunderverb, Thunderverb 200, tube failures, TubeSync Bias Engine, valve, valve failure modes
Posted in Tube Amplifiers | Comments Off
Sunday, June 13th, 2010
After extensive testing, Duesenberg Boutique Amps select TubeSync as a standard part of their high quality boutique amplifier range.
Duesenberg is better known for their high quality guitars. In a unique way Dieter Goelsdorf´s Duesenberg design consolidates guitar construction, features and sounds which have written music history. The art deco style design of headstock, pickguard and metal components gives Duesenberg its own eye-catching look, while the body design bases on the old traditional Jazz guitars like being built from the 40s in Europe and in the USA.
These design elements are combined with the best possible electric guitar construction values of the 50s: Grand Vintage Alnico pickups, classical Fender scale length plus a Gibson-like fingerboard radius. Most of the vintage-style tailpieces, bridges, tremolos, pickups and controls come with greatly improved details.
The Duesenberg Doozy Two amp as pictured above is hand-wired and built in Germany, It is equipped with EL34 power tubes at 110 watts, but with the capabilities of also switching to 55 watts. This all around two channel amp comes with a switchable gain stage for the drive channel as well as serial loops for each channel. Duesenberg are proud to announce that TubeSync technology will be fitted as standard on new models manufactured after July 2010. ‘’TubeSync enhances reliability without changing the tone of the amp’’ More exciting TubeSync features will be announced shortly!
For more information visit :
http://www.tubesync.co.uk
http://www.duesenberg.de
Tags: 12AX7, 6v6, amp, anode, Bob Dylan, Boutique, Curt Smith, Custom, Doozy One, Doozy two, Duesenberg, Duesenberg USA, EL34, Eric Bazilian, Frankfurt, Gaby & Claudia, Germany, guitar, hi end, Hiwatt custom amp, Jörg Weisselberg, KBO Dynamics, Musikmesse, Musikmesse 2010, Output transformer, Randy Kohrs, technician, tube amp, TubeSync, USA, valve amp, valve matching, valves, vintage, Yogi Lonich
Posted in Tube Amplifiers | Comments Off
Thursday, April 1st, 2010
IT TAKES more than sex, drugs and rock ‘n’ roll to make a guitarist sound great. John Hill meets North East amplifier makers at the cutting edge of technology.
ANDY Fallon and Colin Arrowsmith are not guit- arists. Their affair with the valve amplifier isn’t born of a youth spent practising solos or arguing over kit specifications next to the counter of their local guitar store.
In fact, Andy’s experience lies in automotive and military engineering, while Colin is an expert in microelectronics.
However, their contribution to a piece of kit beloved of the White Stripes, The Who and Black Sabbath has attracted the attention of major international amp-makers.
Andy and Colin are co-founders of KBO Dynamics, a Consett company created to market technology designed to improve audio and guitar amplification.
They are the men behind TubeSync, a “tube management system” which monitors the performance of valve amplifiers to avoid meltdowns while maintaining sound.
The product won the innovation award in the Durham and Wearside heat of the nebusinessawards 2009, run by The Journal and Evening Gazette.
KBO co-founder Andy said: “We were looking for a niche market. Neither of us plays the guitar, but we did a lot of brainstorming.
“Colin worked with microelectronics, but he’s also an expert with valve technology. We realised very quickly that the biggest application for valves was inside guitar amps.”
The valve amp isn’t exactly a rapidly advancing technological product. The technology was developed between the world wars and uses a series of vacuum tubes to regulate a signal. It was present in items from TVs to radios, but fell out of favour in the 70s.
The resurgence of such equipment has been prompted by high-end users in the audio and guitar amp market, who praise its natural sound.
Andy said: “There’s a warmer, more rounded tone to it. Anyone who’s serious about playing a guitar would only use a valve amp.”
When they developed TubeSync, the pair didn’t set out to change the sound. Instead, they set their sights on the downside, the problems that plague valve amp users looking for that special sound.
He said: “The closest you can compare it to is an engine management system on a car. It’s like having a maintenance technician looking after your amp 24/7 without you noticing it. It’s continuously monitoring the circuit, looking for faults.
“We got a market research report from Think M in Newcastle. It conducted a series of live interviews with OEM companies and guitarists.
“We looked at the problems people were talking about, but we didn’t change the sound.
“It can detect faults. It can disconnect a pair of valves if it finds one is faulty. You normally have to buy valves in matched pairs and you need to take the amp to a technician to tweak it, but with TubeSync you only need to buy one valve if one fails and it can tweak the system for you.
“One faulty valve can blow up the output transformer. TubeSync can detect this and prevent catastrophic damage.”
KBO had support from a number of North East backers. It won £90,000 from NorthStar Equity Investors’ Proof of Concept fund, developed its prototype with help from Business Link and got £20,000 from the North East England Investment Centre. The process was then advanced by a grant of £20,000 from One North East.
In all, Andy estimates the product has taken 18 months and around £200,000 to develop.
He said: “We built and developed it from the bottom up. We tried to use components that were available in the marketplace and we created our own unique algorithm.
“We don’t think there’s a similar product to this on the market and we’re hoping to receive a patent in the next couple of months.”
Right now, KBO is on the hunt for buyers. The team has just returned from the international Musikmesse instrument trade show in Frankfurt, where they saw a live band perform using TubeSync technology for the first time.
He said: “It was being used by a band playing Pinball Wizard by The Who. We’re expecting to see the technology on stage properly some time this year.
“The lead time on the product is about eight weeks so it could well be appearing in the summer.”
British amp manufacturer Hiwatt, whose users include Arctic Monkeys, The Killers and The Kooks, has incorporated TubeSync into its amps and Andy says that others, such as fellow Brits Orange, are keen.
The company is talking to manufacturers about fitting it in amps this year and down the line it may create variants of the product that could be fitted by amp technicians or even end users.
Tags: 100, amp, Bias Engine, current, Frankfurt, hiwatt, Hiwatt at Musikmesse, Hiwatt custom amp, how to, KBO Dynamics, Musikmesse, Musikmesse 2010, orange, Output transformer, tube failures, Tubes, TubeSync, TubeSync Bias Engine, valve, valve failure modes, valve matching, valves
Posted in Tube Amplifiers, TubeSync | Comments Off
Tuesday, March 30th, 2010
Hayden amps launch the new MoFo 100 with TubeSync during Messe Frankfurt 2010
The new Hayden MoFo 100 with TubeSync
Tags: amp, Ashdown, Ashdown Engineering, Bias Engine, cathode, EL34, Frankfurt, Hayden, Hayden Amps, Mofo, Mofo 100, Musikmesse, Musikmesse 2010, Output transformer, pacemaker, Pacemaker 100, Sound, TubeSync, TubeSync Bias Engine, valves
Posted in Tube Amplifiers | Comments Off
Tuesday, March 30th, 2010
Electro-Harmonix is a New York based company that makes electronic sound processors. The company was founded by Mike Matthews in 1968. They are most famous for a series of popular guitar effects pedals introduced in the 1970s and 1990s.
Electro-Harmonix was founded by Mike Matthews in October 1968 in NYC, USA.
Himself an R&B keyboard player, he had traded his passion of music for a job as a salesman for IBM in 1967. Shortly afterwards he realized that his job at IBM no longer suited him, and he was interested in trying once again to make career for himself as a keyboard player. Concerned he may not be able to support his (now ex) wife while being unemployed, he aspired to save some money to support her before embarking on his journey to stardom. Partnering with an acquaintance of his, Bill Berko, an audio repairman who claimed to have his own custom circuit for a fuzz pedal, they jobbed construction of their new pedal to a contracting house, and began distributing the pedals under a deal with the Guild Guitar Company Fuzzboxes were in demand following a trail of hits involving their sound, including “(I Can’t Get No) Satisfaction ” by The Rolling Stones two years prior, and recent popularization of Jimi Hendrix. The latter connection resulted in the pedals being branded the ‘Foxey Lady’.
Following the unexplained departure of his partner, Matthews was introduced to inventor and electric engineer Robert Myer through IBM colleagues.
Together the two began conceptualizing a circuit designed to emulate Jimi Hendrix’s use of a distortion-free sustain. While testing a prototype of the Distortion-Free Sustainer pedal, which Matthews did by simply plucking the strings of an electric guitar, as he did not play guitar, he noticed another small box connected to the prototype. When asked, Myer explained this box was a line booster, designed to boost the guitar’s passive signal to an appropriate level for the prototype. Matthews listened as the guitar’s volume increased greatly as the booster was turned on, and asked Myer what was involved in manufacturing the pedal. The pedal consisted of a simple circuit and used just one transistor (This would later become know as the Linear Power Booster (LPB-1), a pedal still manufactured today.Shortly afterwards, Matthews founded Electro-Harmonix to produce this and other pedal designs throughout 1960s, 70s and early 80s.
The first Electro-Harmonix product was the Axis fuzz pedal, which was also sold under the name “Foxey Lady” for the Guild guitar company. While working with Bob Myer on the early Big Muff design, Mike Matthews used a booster circuit Myer had incorporated into the design and marketed it as the LPB-1 or Linear Power Booster in 1969. This massively boosted a guitar signal to provide gain by clipping the signal, dramatically changing the sound. The new device provided a raw distorted sound, full of sustain and harmonics.
Several similar devices followed such as the Treble Booster and Bass Booster. The new devices were extremely popular with guitarists.
Electro-Harmonix stopped making pedals in the mid-1980s, and in the early 1990s started selling vacuum tubes re-branded with their name for guitar amplifiers, which they had also been making since the 1970s. However due to demand, and the high prices guitarists were paying for old 1970s pedals on the vintage market, they reissued the more popular old pedals in the mid-1990s, the Big Muff Pi and Small Clone included. In 2002 they started designing new pedals to add to their range. Company policy is that all reissued effects remain as close as possible to the original, vintage designs. This means however that casings, knobs and especially the old-fashioned mini-jack power plug are not up to modern-day standards. This all changed in 2006 with their smaller and more standardized “micro” and “nano” effect lines.
Tags: 12AX7, 2AT7, 5U4G rectifier valve, 5Y3GT, 6bq5, 6v6, amp, ECC81, ECC82, EL34, EL34 Valve, el34eh, EL34L, EL84, Electro-Harmonix, guitar, GZ34, JJ 12AU7, JJ ECC81, KT66, KT88, Laney, Marshall, Output transformer, pre amp, Tung-Sol 12AX7, valve
Posted in Tubes | Comments Off
Monday, March 29th, 2010
All materials used in the JJ tube manufacturing process must comply with the most stringent quality requirements. In tube manufacturing, the fundamental requisite for the best production results is to maintain as high mechanical precision for assembly as possible. JJ Electronic uses assembly precision of no more than ± 0.02 mm.
Before tubes are assembled, they are thoroughly cleaned using such methods as the ultrasonic bath, chemical cleaning or annealing in an inert gas atmosphere (hydrogen, nitrogen).
 JJ EL34 A thorough inspection is performed on every component of the tube internal system before assembly. Assembled systems are then sent to sealing in a glass envelope. During the sealing procedure, the temperature of the glass pass-through joints must be controlled and joints are gradually tempered to relieve the inherent thermal stress.
Next, the assembled glass envelopes are evacuated by mechanical and diffusion vacuum pumps. During this process, the cathode emission coating is activated. All internal parts are heated by a high frequency heater and any spurious dust particles are evacuated. Finally, the getter rings are activated, while they absorb any residual gas inside the glass envelope of the tube.
Every tube is then electrically tested for all parameters which are the key to a flawless operation and a great sound. Specifically, these parameters include: leakage characteristics, internal vacuum level, cathode emission capability, filament voltage and current, anode current saturation level, microphony and others.
Every month, random samples are taken from the production line in order to perform a life time test of 5000 hours under nominal conditions or 1000 hours at maximum specified ratings.
Tube Types
12AX7, 5U4G Rectifier Tube, 5Y3GT, 6v6, ECC82, ECC83S, EL34, EL34 tube, EL34 Valve, EL34L, EL84, guitar, GZ34 S JJ, KT88, TAD, The JJ 12AU7 ECC82,
Tags: 12AX7, 5U4G Rectifier Tube, 5Y3GT, 6v6, ECC82, ECC83S, EL34, EL34 tube, EL34 Valve, EL34L, EL84, guitar, GZ34 S JJ, JJ ELECTRONICS, JJ KT88, JJ RED LABEL, KT88, Laney, MULLARD, Output transformer, TAD, The JJ 12AU7 ECC82, Tube Amp Doctor, UK, valve matching, valves
Posted in Tube Amplifiers | Comments Off
Thursday, March 18th, 2010
Until the introduction of the germanium transistor in the late 1950’s, there was no alternative form of high quality audio amplification to the thermionic valve (American terminology was always ‘Tube’). The 1960’s, 70’s and 80’s saw a steep decline in the usage of valves for all purposes except audio amplifiers, to the point that, with a few exceptions, they were almost entirely replaced by transistors and integrated circuits. However, since the late 1980’s, valve amplifiers have experienced a renaissance which has, in the last decade grown rapidly year on year.
The unique character of the ‘Tube Sound’ has once again attracted both amateur and professional interest in the areas of High Fidelity (HiFi) amplification, Musical Instrument (MI) amplification (notably the electric guitar) and Audio amplification. The dominance of digital technology now, means that the valve amplifier is seen as new to younger people and as nostalgic to the older generation. Please note it is estimated, that the electric guitar amplification market consume as many as three out of four of the world’s production of audio tubes.
 EL34 Valve Many arguments have been put forward as to why tube amplification ‘sounds’ better than digital. Some differences can be proved using measuring instruments, whilst others are down to the nuances of the human ear. Whatever the reason, evidence shows more and more listeners appear to prefer the sound of a tube amplifier.
The demand for tube amplifiers is rapidly growing, with products ranging from a few hundred pounds to several thousand pounds, depending on quality and output power, with tube sales worldwide currently standing at over $100,000,000. Today vacuum-thermionic devices hold sway over the US $100 million worldwide guitar amp business. One rough estimate shows a 10-percent-per-year growth in demand for tubes used in MI instrument amplifiers and high-end audio since the late 1980s, with no apparent slackening.
However, the problems with existing tube amplifier technology is that the circuits used are based on ‘classic’ designs developed in the 1940’s and 50’s and, although more modern technology has occasionally been applied, this is usually confined to regulating the power supplies. One of the principle disadvantages of existing tube amplifiers is that they are very inefficient in converting electrical power into audio power. This is largely due to the ‘classic’ methods of controlling them. All analogue high power amplifiers require a system known as ‘Biasing’ to be applied to them. This controls the output devices and prevents them from ‘Thermal’ overload and eventual destruction. It does, however, incur a heavy cost in loss of output power and increased heat dissipation. In addition valves also need to be used in ‘Matched’ pairs, in order to control distortion of the output signal. This process is time consuming and expensive when carried out on a commercial basis.
THE SOLUTION IS ……..
 EL34
Tags: 6v6, amp, amps, anode, bass, bias, bias problems, current, Custom, EL34, EL34 tube, EL34 Valve, hiwatt, Hiwatt at Musikmesse, KBO Dynamics, KT86, KT88, Marshall, Output transformer, Sound, Tube Amp Doctor, tube failures, Tubes, TubeSync, TubeSync Bias Engine, valves
Posted in Tubes | Comments Off
Wednesday, March 17th, 2010
KBO Dynamics are making their mark in the international music industry. They will be showcasing their technology with a number of major customers at the high profile international music fair, Musikmesse in Frankfurt this March. Hiwatt is just one of the world’s most prominent guitar amp manufacturers and KBO Dynamics are delighted to have TubeSync technology incorporated in their latest amp designs.
 KBO Dynamics Win Innovation Award 2009 KBO Dynamics, winners of the Durham and Wearside Innovation Business Awards 2009, stated : TubeSync technology achieves unique benefits including vastly improved reliability and performance in tube amps. Securing orders from Hiwatt and others is a significant achievement.
 KBO Dynamics Power and Control Devices ‘The scale of the companies that KBO Dynamics are working with is impressive. They have ambitious plans for growth and have been performing very well since receiving investment from us. KBO Dynamics is an excellent example of successful innovation coming out of the North East and is testimony to the region’s strong knowledge base,’ Dr Richard Exley, North Star Equity Investors.
The company has also been supported with market research, manufacturer introductions and early product launch activity by think M., a leading strategic marketing and research agency specialising in technology and innovation.
Andy Fallon, KBO Dynamics, ‘think M.’s channel research played an important part in helping us to secure investment by providing the market evidence required to prove TubeSync’s growth potential. It helped us to refine our offering to amp manufacturers and was instrumental in getting us through the door at some really high profile organisations.’
 TubeSync As KBO look forward to Frankfurt they already have further collaborations underway and anticipate generating more interest from manufacturers, amp technicians and musicians alike. If you would like any more information on TubeSync technology, please visit www.kbodynamics.com.
Tags: 100, amp, Ashdown, bass, bias, bias problems, Frankfurt, hi gain, Hiwatt at Musikmesse, Hiwatt custom amp, how to, KBO, KBO Dynamics, Laney, Marshall, Musikmesse, Musikmesse 2010, orange, Output transformer, Pacemaker 100, Think M, Tube Amp Doctor, tube failures, Tubes, TubeSync, UK, valve failure modes, valves
Posted in TubeSync | Comments Off
|
