Posts Tagged ‘valves’

TubeSync Service Points : Why Should You?

Friday, September 10th, 2010

TubeSync technology

TubeSync streamlines with the amp’s circuitry to constantly test and monitor the amp without altering the fundamental amplification process, tone or sound. It eliminates the need for bias current matching, increases tube life by micro-adjusting the bias on each tube, predicts tube failure and can, in the event of tube failure, even run the amp at half power, preventing catastrophic amp damage. ­­

The result is an amp unhampered by many of the problems associated with conventional tube amplification allowing musicians to enjoy classic tube sound quality without the frustrations.

These are just some of TubeSync’s unique features:

  • Eliminates the need for bias current matching of output tubes
  • Micro-adjusts the bias on each tube to ensure its full potential is realised
  • Assures reliability
  • Maintains optimum performance
  • Increases tube life
  • Reduces quiescent power consumption
  • Sets tubes at their optimum temperature as soon as you power up
  • Detects tube failure and prevents catastrophic damage to amp
  • Switches out faulty tubes and runs amps at half power until tube can be changed

A new industry standard

TubeSync technology has now been incorporated in new amp designs from some of the world’s most prominent amp manufacturers. Hiwatt, famed for their legendary reliability, was one of the first OEMs to recognise the potential of TubeSync for further enhancing the reliability and performance of their amps. KBO Dynamics continues to work with the industry’s biggest names to raise the bar in tube performance and reliability, creating a new industry standard in amp design and manufacture.

Introducing the Bias Engine

The Bias Engine is the hardware that encapsulates TubeSync’s unique technology. Fitting the Bias Engine is a straightforward procedure, with all necessary components supplied within the retrofit kit. It is stipulated that the Bias Engine is fitted by an accredited technician.

Bias engine retailThe Bias Engine is sold as a part of the TubeSync Professional Amp Upgrade Kit containing:

TubeSync Bias Engine Hardware

TubeSync hardware is wired straight into the amp’s circuitry. The Bias Engine is a very compact component that can be incorporated in both point-to-point and PCB wired amps.

Tube fault LED indicator harness and amp chassis LED plate

The Bias Engine is wired to 4 LED indicators that permanently illuminate when the tube is faulty and ‘flash’ when the tube needs to be replaced. The LEDs sit on the amp chassis, surrounded by the LED plate.

Wiring harness and mechanical fixings

The wiring harness, bundling all necessary wires and connectors, completes the kit along with a full set of mechanical fixings for securing the Bias Engine.

TubeSync Bias Runner software

Improving amplifier biasing methods, servicing and fault diagnostics

Interfacing with Bias Engine hardware, our Bias Runner software has been designed to allow OEMs and professional amp technicians to interrogate the status of an amplifier, alter bias settings, perform field diagnostics and configure the amp for best performance, further adding value to your services.Bias Runner_02

Bias Runner is easy to install, offering full fault diagnostics, enabling tube biasing with and without audio present, either collectively or as individual tubes. It is the perfect tool for warranty provision and servicing, providing a database of hardware serial numbers and storing amplifier parameter settings for full traceability.

Total service hours

Reads and displays the total number of hours the amplifier has been powered up. Optional reset facility available if required.

Total duration with audio

Reads and displays the total number of hours the amplifier has been driven with audio. Optional reset facility available if required.

Total hours idle

Reads and displays the total number of hours the amplifier has remained idle i.e. has not been driven with audio. Optional reset facility available if required.

Faulty tube log

Reads and displays the number of times a tube has been switched off due to a fault during the lifetime of the amplifier. A reset function is available for each individual tube.

Bias current (Audio present)

Enables the user to adjust tube current bias settings collectively or individually

Bias Current Idle (No Audio Present)

Enables the user to adjust tube current bias settings collectively or individually

Hardware and version status

Displays the serial number of the TubeSync module and the hardware version number

Serial number and settings database

Stores all serial numbers together with amplifier parameter settings in a   database for full traceability

Our commitment to you

We work closely with all of our partners to promote high standards and to support you in realising the full benefits of our truly innovative and impactful core technology and associated products.

As a TubeSync retailer or accredited technician you will receive:

Guaranteed product quality

All of our products are manufactured to the highest quality standards using state of the art assembly equipment. All components are ROSH compliant and uniquely identified for full batch traceability

A comprehensive solution

A complete package of hardware and software supports ease of use and easy configuration

Technical support

Our approach is founded on product and service quality. We offer our retail partners generous technical support to ensure that you are fully equipped for promoting TubeSync technology and advising your customers appropriately.

As an authorised retailer you will appoint a technician(s) who will receive training from our own technical team and who will be required to become certified as an accredited TubeSync technician before performing installations.

Warranty

All components come with a 12 month warranty which commences from the date of installation. Full warranty terms are available on request.

Dennis Marshall’s Amp Repair Shop Scotland Becomes An Approved TubeSync Service Point

Thursday, September 2nd, 2010

Over the last 40 years Dennis Marshall has worked with many people in the music business. Some famous, some to become famous, but mostly just plain ordinary musicians. Dennis has gained a reputation throughout the UK for his work and contribution to the music business and the latest news is……is that Dennis has recently signed up as the exclusive Scottish installer of TubesSync.

‘’TubeSync is a new product and is the new ‘wheel’ for guitar tube amps’’ states Dennis, ‘’ No need to match output valves in your amp. Drop in any combination of makes OR EVEN TYPES!!! (EL34, KT77, KT88, 6L6 etc).’’

‘’ TubeSync will automatically sense and adjust the output bias of each tube independently to balance the amp. Imagine what new tones you can create from those limitless output tube combinations!’’

Dennis has an amp in his workshop with Tubesync installed – so anybody is welcome to come in and try it out!!

You can reach Dennis directly on…………..

Telephone 01383 881761

Email tech@dennismarshall.co.uk

Or Mail or in person at

6 Main Street, Newmills

Dunfermline, Fife, KY12 8SR

Bias_Engine

Every person who goes into Dennis’s workshop is equally important and will always get the same high standard of service. Dennis is an approved Mesa Boogie engineer and has worked with a number of high profile bands including:

Deacon Blue, The Proclaimers, Roger Nichols, Texas, George Michael band, Nine Inch Nails, Wasp, Uriah Heep, The Hazey Janes, Pete Caban, Glasvegas, Katie Melua, Dave Valentine, Ona, Mark DeNeys, Fiesty Piranhas, Ally McErlaine, Bobby Bandiera, Stapleton, Southside Johnny and the Asbury Jukes, Dougie MacLean, The Eels, Joe Gore, Joe Gormal, The Searchers, Jon Solish, Ray Wilson, Idlewild, Lionel Richie, Paul Buchanan, Stuart McCredie, The Eagles, Ron Sexsmith, Tam White, Lauri Anderson, Willie Logan, Bobbie Heatley, Steve Adey, Robbie Gladwell, Frank Macbeth, Sons and Daughters, Hamish McGregor, Miguel Orgel, Pilot, John Goldie , Marcus Ford, Echo and the Bunnymen, Athol Fraser, Mats Nermark, Bobby Carlos, Craig Oxley, Steuart Smith, The Jam, Healthy Minds Collapse, Avast, Adrian Clark, Nick Guppy, Sergeant, Tango in the Attic, Mike Walker, NYJOS, One Night of Queen, Davie Brockett, Runrig, Glasshouse Project, Kevin Brown, Ocean Colour Scene, Tony ‘Doggen’ Foster, Midas Fall, Mayhew….

TubeSync Bias Engines Roll Off The Production Line

Friday, August 20th, 2010

Due to popular demand the TubeSync Bias Engine is now in volume production!

TubeSync

For order enquiries please email sales@tubesync.co.uk

Tired Pony Play With TubeSync In Their First Live Show

Monday, August 16th, 2010

Tired Pony, the supergroup featuring Snow Patrol frontman Gary Lightbody and REM”s Peter Buck, played their first LIVE gig with the help of an Audio Kitchen base amp fitted with TubeSync.

Tired_Pony

Tired Pony was formed by Gary Lightbody (of Snow Patrol), who had a “long-term ambition” of making a country album. He revealed the project’s existence in May 2009. In the interview, he expressed his love for country music, which he said he had loved for a long time: “I always thought I had a country album in me and it turns out I did.” The rest of Snow Patrol expressed excitement for their band-mate, “delighted that [Lightbody was] getting to exorcise all his crazy ideas.”In October 2009, Lightbody in his blog on Snow Patrol’s website revealed the members of the group to be Richard Colburn (of Belle & Sebastian), Iain Archer, singer Miriam Kaufmann (Archer’s wife), and Jacknife Lee. He talked about two more members whom he was very excited about, but didn’t name them. He also stated that the album won’t be country as was being reported, but would be “country-tinged”. In January 2010, Hot Press reported Peter Buck (of R.E.M.) to be a member of the group. Lightbody described Buck as one of his “all-time heroes” and admired his talent for playing a variety of instruments. Lightbody looks at the project as something he has “wanted to get out of his system”, and said that “he doesn’t know whether people will dig it or not.”He has expressed doubts about the commercial viability of the group’s work, mainly in the United States.

Tired Pony played their first ever live show at London’s Forum venue in Kentish Town on July 14th 2010 with the help of an Audio Kitchen Base Chopper fitted with TubeSync!!

For further information regarding TubeSync Audio Kitchen Amps please email info@tubesync.co.uk or steve@mutronics.co.uk

TubeSync_275

TubeSync UK Service Points Being Appointed

Friday, August 13th, 2010

We are offering select retailers and amp technicians the opportunity to become authorised suppliers of TubeSync technology and to take advantage of our new innovative amplifier technology.

  • Become a supplier of KBO Dynamics’ TubeSync Bias Engine
  • Generate revenue from hardware sales and fitting
  • Benefit from accreditation as a TubeSync technician
  • Add value to your offering with improved amplifier biasing methods, servicing and fault diagnostics, using TubeSync Bias Runner software
  • Get involved as TubeSync emerges in new amp designs from major amp manufacturers.

If you would like to be considered as TubeSync ‘Service Point’ then please email : info@tubesync.co.uk or telephone +44 (0) 1207 585846.

TubeSync_Service_Point

Duesenberg Boutique Amps Make TubeSync A Standard Integral Component.

Sunday, June 13th, 2010

After extensive testing, Duesenberg Boutique Amps select TubeSync as a standard part of their high quality boutique amplifier range.

Duesenberg is better known for their high quality guitars. In a unique way Dieter Goelsdorf´s Duesenberg design consolidates guitar construction, features and sounds which have written music history. The art deco style design of headstock, pickguard and metal components gives Duesenberg its own eye-catching look, while the body design bases on the old traditional Jazz guitars like being built from the 40s in Europe and in the USA.

guitar

These design elements are combined with the best possible electric guitar construction values of the 50s: Grand Vintage Alnico pickups, classical Fender scale length plus a Gibson-like fingerboard radius. Most of the vintage-style tailpieces, bridges, tremolos, pickups and controls come with greatly improved details.

Doozy2_Amp_300

The Duesenberg Doozy Two amp as pictured above is hand-wired and built in Germany, It is equipped with EL34 power tubes at 110 watts, but with the capabilities of also switching to 55 watts. This all around two channel amp comes with a switchable gain stage for the drive channel as well as serial loops for each channel. Duesenberg are proud to announce that TubeSync technology will be fitted as standard on new models manufactured after July 2010. ‘’TubeSync enhances reliability without changing the tone of the amp’’ More exciting TubeSync features will be announced shortly!

For more information visit :

http://www.tubesync.co.uk

http://www.duesenberg.de

Hiwatt Amplify Their Success With TubeSync

Thursday, April 1st, 2010

IT TAKES more than sex, drugs and rock ‘n’ roll to make a guitarist sound great. John Hill meets North East amplifier makers at the cutting edge of technology.


Hiwatt & TubeSync

ANDY Fallon and Colin Arrowsmith are not guit- arists. Their affair with the valve amplifier isn’t born of a youth spent practising solos or arguing over kit specifications next to the counter of their local guitar store.

In fact, Andy’s experience lies in automotive and military engineering, while Colin is an expert in microelectronics.

However, their contribution to a piece of kit beloved of the White Stripes, The Who and Black Sabbath has attracted the attention of major international amp-makers.

Andy and Colin are co-founders of KBO Dynamics, a Consett company created to market technology designed to improve audio and guitar amplification.

They are the men behind TubeSync, a “tube management system” which monitors the performance of valve amplifiers to avoid meltdowns while maintaining sound.

The product won the innovation award in the Durham and Wearside heat of the nebusinessawards 2009, run by The Journal and Evening Gazette.

KBO co-founder Andy said: “We were looking for a niche market. Neither of us plays the guitar, but we did a lot of brainstorming.

“Colin worked with microelectronics, but he’s also an expert with valve technology. We realised very quickly that the biggest application for valves was inside guitar amps.”

The valve amp isn’t exactly a rapidly advancing technological product. The technology was developed between the world wars and uses a series of vacuum tubes to regulate a signal. It was present in items from TVs to radios, but fell out of favour in the 70s.

The resurgence of such equipment has been prompted by high-end users in the audio and guitar amp market, who praise its natural sound.

Andy said: “There’s a warmer, more rounded tone to it. Anyone who’s serious about playing a guitar would only use a valve amp.”

When they developed TubeSync, the pair didn’t set out to change the sound. Instead, they set their sights on the downside, the problems that plague valve amp users looking for that special sound.

He said: “The closest you can compare it to is an engine management system on a car. It’s like having a maintenance technician looking after your amp 24/7 without you noticing it. It’s continuously monitoring the circuit, looking for faults.

“We got a market research report from Think M in Newcastle. It conducted a series of live interviews with OEM companies and guitarists.

“We looked at the problems people were talking about, but we didn’t change the sound.

“It can detect faults. It can disconnect a pair of valves if it finds one is faulty. You normally have to buy valves in matched pairs and you need to take the amp to a technician to tweak it, but with TubeSync you only need to buy one valve if one fails and it can tweak the system for you.

“One faulty valve can blow up the output transformer. TubeSync can detect this and prevent catastrophic damage.”

KBO had support from a number of North East backers. It won £90,000 from NorthStar Equity Investors’ Proof of Concept fund, developed its prototype with help from Business Link and got £20,000 from the North East England Investment Centre. The process was then advanced by a grant of £20,000 from One North East.

In all, Andy estimates the product has taken 18 months and around £200,000 to develop.

He said: “We built and developed it from the bottom up. We tried to use components that were available in the marketplace and we created our own unique algorithm.

“We don’t think there’s a similar product to this on the market and we’re hoping to receive a patent in the next couple of months.”

Right now, KBO is on the hunt for buyers. The team has just returned from the international Musikmesse instrument trade show in Frankfurt, where they saw a live band perform using TubeSync technology for the first time.

He said: “It was being used by a band playing Pinball Wizard by The Who. We’re expecting to see the technology on stage properly some time this year.

“The lead time on the product is about eight weeks so it could well be appearing in the summer.”

British amp manufacturer Hiwatt, whose users include Arctic Monkeys, The Killers and The Kooks, has incorporated TubeSync into its amps and Andy says that others, such as fellow Brits Orange, are keen.

The company is talking to manufacturers about fitting it in amps this year and down the line it may create variants of the product that could be fitted by amp technicians or even end users.

TubeSync_225

Hiwatt launch TubeSync at the Frankfurt Musikmesse 2010

Thursday, April 1st, 2010

Famed for their legendary reliability and tone, Hiwatt have gone one step further in the reliability stakes by employing TubeSync® technology in their already bulletproof amplifiers.

Over the last year, Hiwatt and Durham-based KBO Dynamics have developed their own version of a pioneering technology called TubeSync®, which Hiwatt will launch at Frankfurt Musikmesse 2010 in March. The technology has been developed in order to overcome problems associated with conventional tube amplification such as biasing, tube longevity and overall reliability. What the collaboration has achieved is to improve amplifier design without changing the fundamental amplification process yet retaining the classic Hiwatt tone and sound.

Hiwatt Launch TubeSync

Although not an integral part of the amplification process, Tubesync® is connected to the heart of the amp’s circuitry, constantly testing and monitoring; it’s like having an amp technician working full time inside the box every time the amp is powered up. This technology eliminates the need for tube bias current matching, increases tube life by micro-adjusting the bias on each tube, predicts tube failure and can, in the event of a catastrophic tube failure, even run the amp at half power. The result is the eradication of many of the problems hampering conventional tube amplifiers and peace of mind for the musician wise enough to have taken this route.

KBO Dynamics Chief Exec Andy Fallon: “It has been a pleasure working with Hiwatt who have been extremely receptive to change and have embraced the new technology. They have seen the benefits it can bring to them and of course, their customers, and we are looking forward to further exciting collaborations. This technology genuinely has raised the bar concerning reliability and classic tube amps, and what’s more. It’s been developed exclusively in the UK.”

Hiwatt logo

Hayden Amps New MoFo 100 With TubeSync

Tuesday, March 30th, 2010

Hayden amps launch the new MoFo 100 with TubeSync during Messe Frankfurt 2010

Hayen Mofo 100

The new Hayden MoFo 100 with TubeSync

JJ Electronic Tubes / Valves

Monday, March 29th, 2010

All materials used in the JJ tube  manufacturing process must comply with the most stringent quality requirements. In tube manufacturing, the fundamental requisite for the best production results is to maintain as high mechanical precision for assembly as possible. JJ Electronic uses assembly precision of no more than ± 0.02 mm.

Before tubes are assembled, they are thoroughly cleaned using such methods as the ultrasonic bath, chemical cleaning or annealing in an inert gas atmosphere (hydrogen, nitrogen).

JJ EL34

JJ EL34

A thorough inspection is performed on every component of the tube internal system before assembly. Assembled systems are then sent to sealing in a glass envelope. During the sealing procedure, the temperature of the glass pass-through joints must be controlled and joints are gradually tempered to relieve the inherent thermal stress.

Next, the assembled glass envelopes are evacuated by mechanical and diffusion vacuum pumps. During this process, the cathode emission coating is activated. All internal parts are heated by a high frequency heater and any spurious dust particles are evacuated. Finally, the getter rings are activated, while they absorb any residual gas inside the glass envelope of the tube.

buy

Every tube is then electrically tested for all parameters which are the key to a flawless operation and a great sound. Specifically, these parameters include: leakage characteristics, internal vacuum level, cathode emission capability, filament voltage and current, anode current saturation level, microphony and others.

Every month, random samples are taken from the production line in order to perform a life time test of 5000 hours under nominal conditions or 1000 hours at maximum specified ratings.

Tube Types

, , , , , , , , , , , , , , ,