Guitarist Mitch Laddie has been out touring with the product fitted to his Mesa/Boogie F-50, which he said sounds "incredible". "I had totally fallen out of love with this particular amp before Tubesync was fitted but the difference in sound is more than substantial. The response and tone have been improved ten-fold. Very tight, very fat and all round punchier, especially in the low to mid frequencies," he told TPi.
"I believe the product is very interesting and definitely nothing like anything I've seen or used before. The main advantages of the product are that not only does it give you a valve maintenance feature by displaying a light if a fault is found within a valve, but it manages your valves to run at an equal number of milliamps. This means that each valve is working at an equal rate which in theory gives you optimum amp performance.
"You can also connect the product to a computer and by using the TubeSync software you can dial in the parameters for each valve to your liking. This makes room for a lot of exciting experimentation," he said.
"You can fit whichever valves you like, no matter which amp you are using with the product fitted and not only can you fit whatever valves you chose but you can mix valves and it will automatically bias them with no issues at all. This also gives room for a lot of exciting experimentation which we are going to get under way when I return from the current tour."
Technical director for Orange Amps, Adrian Emsley, plans to launch a new 100W model involving TubeSync at the upcoming Winter NAMM show next year, but didn’t disclose any further details. He did say that he thought the product was “extremely groundbreaking” with regards how it can be incorporated into high end tube guitar, bass and hi-fi amplifiers. “It can keep an amplifier perfectly set up and keep it always sounding great on the road!” he said.
Audio Kitchen Amps, an Acton-based guitar amp manufacturer, has incorporated TubeSync into its bass amps, one of which is currently being used by Kings of Leon. Audio Kitchen’s Steve Crow commented: “It's pretty cool, that's for sure. For me the most revolutionary aspect is the show-must-go-on factor; normally if an output valve goes bandy during a gig it'll take out a fuse on the amp and the player is left playing air-guitar, but TubeSync will shut down the offending valve pairs and the show goes on. Genius.”
Tired Pony, the supergroup featuring Snow Patrol frontman Gary Lightbody and REM’s Peter Buck, have already played their first live gig with the help of an Audio Kitchen Base Chopper amp fitted with TubeSync, at London’s Forum venue in Kentish Town on July 14. According to Crow the band have been “loving it” so far and there are other bands lined up to try it out.
Crow added: “People are scared of the word 'Bias', but TubeSync does lots of the thinking for you so it's possibly a less daunting proposition for the average musician or tech. Also because the valves are individually biased, you don't necessarily need matched pairs of output valves anymore.”
Hiwatt UK amplifiers, as used by the likes of Arctic Monkeys, Coldplay, Killers and The Enemy, is another adopter of the TubeSync. The company plans to install the product on its pro series of guitar amplifiers as standard. Hiwatt’s Mark Lodge said: “Pretty much all of the bands that we deal with will start to add TubeSync to their amplifiers over the next year. We are just actually putting together the wiring practices etc, for our builders to be able to incorporate TubeSync into our UK pro series custom shop amplifiers.” Lodge said the reason they have got behind the product from the start was because it is a “fantastic” piece of kit that solves many problems associated with valve amplifiers.
He added: “We all know that valve amplifiers sound by FAR the best, the only issue is that 99.9% of the time, the valves let the amplifier down. The deteriation can be traced back to when the military ceased to use valves; since then, the quality has gone down and down. TubeSync negates this and actually once more gives builders and performers hope and peace of mind. I think it is a huge step forward for the valve amplifier.”
Wienbrock Amplifiers owns two 45W production amps that currently use TubeSync, one with overdrive, one without. Rob Wienbrock said: “The TubeSync takes a completely new approach that has many hidden benefits. Its main advantages are significant reduction in power consumed, huge reduction in heat emissions, greatly extended valve and component life and great reduction in maintenance costs.
BREAKING THE BACKLINE MARKET
John Henry’s will be the first backline rental company to test out the TubeSync management system. Said Fallon: “We see the backline rental market as a market for us because they do have problems with amplifiers and they have to maintain the ones they’ve got when they rent them out.
“John Henry took us round his facilities and he has hundreds of amplifiers, one shelf had about 50 marshall amps on, so we realised we needed to give him something quick to install.”
John Henry commneted: “I haven’t managed to see one in action yet but from the brief overview it was a very interesting product, there’s nothing else like it, and if it works we would certainly be interested in having a look and trying it out. Anything that can tell you when a valve is about to pop is a good thing.
“I was a little bit concerned about how you actually fit it without drilling holes and damaging the authenticity of a vintage piece of kit because as it stands it’s based at the valve market. I think they need to make one which is an external fit. So it’s in the early stages and I’d need to get my engineers to test it out, but in theory it looks good.”
KBO Dynamics has been working on an external fit model specifically for the backline rental market. Said Fallon: “At the moment TubeSync is a circuit card that goes in the amp, but we’ve put it into a large circuit board self contained unit. It de-skills the fitting process so the user can easily retro-fit it into an existing guitar amp in around 5-10 minutes. John Henry will be the first one to test this out.”
Added Henry: “We go through thousands of valves a year so for us it would be a great asset as we might not need to replace a set of valves but maybe just one. It has a lot of potential.”
AND MORE............................................
"TubeSync does what it says on the tin! We are looking to incorporate it into our next generation of amps!"
(Technical Director)
"Not matching tubes that's a big one - it's a pain in the neck – it's key to getting a successful tube amp 'fantastic'. if you don't need to use matched pairs and there's no need to bias, then that’s amazing, the efficiency savings on the factory floor will be a awesome. Who needs a Six Sigma Black belt!"
(Amplification Product Line Manager)
"You're saying all of the things that we hear on a regular basis, i.e. ooh, tube longevity – these are things that crop up that keep me awake at night. I'd say it’s pretty unique"
(Marketing Manager, Guitar Amplifier Manufacturer)
"We are currently going for the ISO 14001 environmental accreditation. The energy savings resulting from TubeSync will be part of our continuous improvement plan. If everyone does their bit, the world will be a much greener place."
(Operations Manger, Guitar Amplifier Manufacturer)
"There is only so much power a tube can throw out before it dies. So it's an efficiency thing? It gives you more power for less heat? Useful, yeah"
(Lead Development Engineer)
"TubeSync can optimise the running temperature of the tube down considerably, and as a function of that, the life of the tube increases. And that's something that's far more interesting than putting more power through it."
(Technical Director)
|